Software Installation

Basics of Gimbal 30z

The basics of software configuration for Gimbal 30z are explained in the Software Installation section of the Gimbal 30z Hardware Manual.

Note

The Autopilot 1x located inside the PCS is the device that will store the configuration of Gimbal 30z. 30z does not receive any software configuration, since it is operated by the 1x.

The Software Applications section from the Gimbal Software Manual has links for all the necessary configurations.

Basics of PCS

The basics of software configuration for PCS are explained in the Software Installation section of the PCS Hardware Manual.

Visual Tracking with Gimbal 30z

The visual tracking is configured with Veronte Ops.

First of all, configure the 30z reading the Gimbal panel section of Veronte Ops user manual. Then, add the tracking action to the Gimbal Buttons widget.

Once the button has been added, use the Iframe widget to visualize the video recording (enter the url generated by the Web Converter app) and select on the video displayed the object desired to track.

Important

The tracking button is not a start/stop button, it is only for stopping the tracking action. Therefore, to start tracking back, users will have to select again the object with the Iframe widget.

Finally, the complete setup and configuration of Gimbal 30z is explained in the Gimbal - Integration Examples section of Veronte Ops user manual.