Quick Start

First Steps

The first steps of a PCS installation can be found in the Quick Start section of the PCS Hardware Manual.

The basics of Gimbal 30z are explained in the Quick Start section of the Gimbal 30z Hardware Manual.

Warnings

Please take into account the Warnings section of the PCS Hardware Manual.

Requirements

• Power supply of 230 V AC.

• A computer with ethernet, to configure PCS and Gimbal 30z.

Note

As explained in the Quick Start section of Gimbal 30z Hardware Manual, it requires a Veronte Autopilot 1x to control the movement and receive the video signal. Nonetheless, PCS includes an Autopilot 1x inside, so this requirement is fullfiled by the TC30 itself.