Sensors

Sensors section permits to configure any sensor connected or internal from Veronte.

Accelerometer	Configure the accelerometer parameters
Altimeter	Enable the Altimeter into navigation if a sensor is connected to Veronte
GNSS	Configure GNSS receivers, RTK, Compass, External source and NTRIP
Gyroscope	Configure the gyroscope parameters
I2C devices	Configure Lidar sensors connected through I2C
Magnetometer	Configure the internal magnetometer or an external one
Obstacle Detection	Enables the obstacle detection and configured it
Pressure	Menu including both dynamic and static pressure configurations
RPM	Configure RPM sensors parameters
Speed Down	Enable the navigation using a Speed down sensor
Ultrasound	Menu to configure Internest with Veronte