Others¶
This section of the manual contains the information about external sensors/devices configuration. These devices are configured on the different ports available in Veronte (CAN buses, Serial buses, digital I/O, etc):
Port / Manager |
Description |
---|---|
CAN Configuration |
Configuration of the two CAN buses (A and B) |
I/O Manager |
Configuration of serial ports, LOS & BLOS connection , and others. |
Digital Input Manager |
Configuration of PPM signals, pulses or rpm sensors. |
As Custom Messages need to be defined for both serial and CAN communication, there will be a section after the CAN Configuration and I/O Manager sections.