Whenever there is an issue with connection, powering or configuration, the unit enters in Safe Mode and the following window is displayed.
The options available are:
Exit Safe Mode. The Veronte tries to initialise again in order to exit Safe Mode.
Change setup: this option is used to load a configuration file into Veronte. The user has to select a configuration file, once selected a new window will be displayed in Veronte Pipe showing the version and identification of the configuration file and the autopilot where the file is going to be loaded.
Upload Configuration - Safe Mode
With this tool, the configuration file is loaded directly on the autopilot. Now Pipe is only a tool to load the file from the computer to the autopilot and the configuration parameters will not be shown in the software window before being loaded on the autopilot.
Update: this option allows the user to Update the Veronte Unit, this is explained in Update Onboard Software.
Retry: the unit will try to boot again.