Maintenance Mode

Whenever there is an issue with connection, powering or configuration, the unit enters in Maintenance Mode. The autopilot icon changes and the following window is displayed:

Maintenance Mode

The options available are:

• Exit Maintenance Mode. The Veronte AP tries to initialise again in order to exit Maintenance Mode. Whatever option the user chooses of the ones described below to fix the issue, this button will be the last step.

• Change setup: this option is used to load a configuration file into Veronte. The user has to select a configuration file, once selected, a new window will be displayed in Veronte Pipe showing the version and identification of the configuration file and the autopilot where the file is going to be loaded.

Upload Configuration - Maintenance Mode

Press “Start” and this option will upload the configuration file directly in the autopilot. Now Pipe works a tool to load the file from the computer to the autopilot and the configuration parameters will not be shown in the software window before being loaded on the autopilot.

• Update: this option allows the user to Update the Veronte Unit. This is explained in Update Onboard Software.

• Retry: the unit will try to boot again.