Quick Start

This user manual covers the mechanical and electrical assembly. This document includes references to install and configure software.

Veronte Autopilot 4x is the main element in our FCS for UAV.

../_images/system-overview.png

System Overview

Veronte Autopilot 4x contains all electronics and sensors required to properly execute all the UAV functions. A Veronte-based FCS contains the following elements:

  • A Veronte Autopilot 4x installed in a vehicle to be controlled. This autopilot executes GNC algorithms in real time to accomplish the planned mission and transport the payload.

  • Veronte Ops - Software dedicated to mission planning, configuration and operation. It allows the user to monitor connected UAS in real time, to interact with them and to replay previous missions for post-flight analysis.

  • An Autopilot 1x GND unit or PCS linked between Veronte Ops and Veronte Autopilot 4x. They support manual and arcade modes with conventional joysticks.

Basic Connection Diagram

../_images/autopilot_4x_connections.png

Warnings

  • This user manual includes references to manuals for software applications. Select your software version to read them.

  • Power out of range can cause irreversible damage to the system. Please read carefully the manual before powering the system.

  • Users must not power on a Veronte Autopilot 4x without a suitable antenna or 50 \(\Omega\) load connected to the DAA SSMA if the unit has an ADS-B and/or 4G module activated.

    Danger

    This may damage the Autopilot 4x unit.