Integration examples

Internal Radio Configuration

To configure the internal radio of the autopilot, read Digi Internal Radio - Integration examples section of 1x PDI Builder user manual.

Adjustable Antenna Mount

../_images/adjustable-antenna-mount.png

Adjustable antenna mount

The adjustable antenna mount allows to set up certain antennas at 0, 45 or 90º, depending on the polarization desired.

../_images/angles.png

PCS antennas at 0, 45 and 90º

To attach the an antenna to the holder with the adjustable mount read the following steps:

  1. Slide the antenna through the slot.

../_images/slot-antenna.png

Adjustable mount - Step 1

  1. Screw the connector and the nut to fix the antenna.

../_images/screw-antenna.png

Adjustable mount - Step 2

  1. Attach the adjustable antenna mount with both knobs. Use the holes which correspond to the desired position.

../_images/adjustable-knobs.png

Adjustable mount - Step 3