This quick start guide provides the necessary information to have Veronte Autopilot set up and functional to operate its mission.
This guide covers the following points:
First steps: veronte autopilot connections and software installation.
HIL simulation: how to perform a simulation with an existing configuration using veronte autopilot.
Internal radio module pairing: how to pair of the ground segment (GND) and onboard (AIR) autopilots.
Outputs configuration: how to calibrate the servos for a good control of the surfaces/devices that determine the attitude of the platform.
Transmitter: how to set up an external transmitter to control the vehicle when necessary.
Pre-flight checklist: set of sensors, communications, and other events that should be verified before starting the mission.