Sensors¶
Sensors section permits to configure any sensor connected or internal from Veronte.
Accelerometer |
Configure the accelerometer parameters |
Altimeter |
Enable the Altimeter into navigation if a sensor is connected to Veronte |
GNSS |
Configure GNSS receivers, RTK, Compass, External source and NTRIP |
Gyroscope |
Configure the gyroscope parameters |
I2C devices |
Configure Lidar sensors connected through I2C |
Magnetometer |
Configure the internal magnetometer or an external one |
Obstacle Detection |
Enables the obstacle detection and configured it |
Pressure |
Menu including both dynamic and static pressure configurations |
RPM |
Configure RPM sensors parameters |
Speed Down |
Enable the navigation using a Speed down sensor |
Ultrasound |
Menu to configure Internest with Veronte |