Mission

The common way to work with Veronte is to create missions. Missions can be created and managed though the Mission menu. To access this menu, click on at the upper left corner and select Mission in the pull-down menu. The Mission toolbar will appear as shown at the image below:

Mission toolbar menu access

The mission toolbar provides graphical tools to create the path that the aircraft follows while it is in cruise phase. Multiple missions can be created for different purposes. The missions generated are stored into the Autopilot Air unit and into the Operation folder of the PDI configuration files when exported.

Next, a detailed description of the toolbar is given. And an example of how to set up a mission will be given in the following section.

Toolbar

Mission toolbar

The controls found in the toolbar are detailed in the following table.

	Open Detail	Displays Terrain and Marks configuration.
	Colours	Line colour.
	New Waypoint	Add new waypoint on click position.
	Segment	Add a straight line.
	New Orbit	Add a orbit.
	Fly By	Tool to adapt straight path corners into turns.
|logo7|	Intersect Lines	Undoes the Fly-by command.
|logo8|	Multiple Choice	Selection tool.
|logo9|	Event Mark	Add a mark to trigger an event.
|logo10|	Obstacle	Add an obstacle signal the aircraft has to avoid.
|logo11|	New Polygon	Draw areas on the map for association with polygon event.
|logo12|	Circular Area	Draw a circular area on the map. For association with polygon events.
|logo13|	References	Create points of reference.
|logo14|	Mapping	Predefined tasks helper: Search & Rescue, Photogrametry,…
|logo15|	Import Route	Import NMEA route configuration.
|logo16|	Export Route	Export to a .kml or a .csv file the route created.
|logo17|	Ruler	Measure on map.