Software applications¶

T28 is a tracking antenna which operates with a Veronte PCS. PCS in turn is controlled by an Autopilot 1x. Hence, the software configuration and operation is performed to the Autopilot 1x in the PCS.

Veronte Link¶

Veronte Link establishes communication between a computer and any Veronte product by creating a VCP bridge. It allows to use multiple control stations and autopilots to be interconnected, operating simultaneously. Veronte Link also includes a post-flight viewer, to reproduce all recorded data from previous flights and generate plots and reports.

For more information, visit the Veronte Link user manual.

1x PDI Builder¶

1x PDI Builder is the main configuration tool to adapt a Veronte Autopilot 1x to a specific vehicle, including user-defined commnication protocols. 1x PDI Builder includes:

Telemetry: real-time onboard UAV metrics, such as sensors, actuators and control states.
Configuration: edit vehicle settings, such as servo trim, interface/port management and modes.
Automations: actions that are automatically executed when a set of configured conditions are accomplished.
Block Programs: Veronte Autopilot 1x can be programmed with a friendly-user programming language.

For more information, visit the 1x PDI Builder user manual.

Veronte Ops¶

Veronte Ops is the application employed to operate and monitor the vehicle during missions. Its interface can be easily customized and adapted to each case.

For more information, visit the Veronte Ops user manual.