Technical¶
Features¶
Communications
2 x isolated CAN buses
1 x RS 232 bus
1 x I2C bus
1 x USB port
1 x RS 485 full duplex bus
Over USB, RS 485 or RS 232 firmware update
Input / Output
16 x configurable input / output signals
1 x EQEP bus
Power
6.5 - 36 V DC required for input power supply
1 x output power with 3.3 V, up to 100 mA
1 x output power with 5 V, up to 100 mA
Protection
EMI shield
Against inrush current for connecting power supply
Note
The number of communication ports and signals can be increased with Veronte CEX or Veronte MEX.
Internal Radio¶
RF baudrate |
250 kbps |
LOS range |
Up to 3200 m |
Transmission power |
19 dBm |
Receiver sensitivity |
-103 dBm |
Frequency band |
ISM 2.4 GHz |
Mechanical and Electrical Specifications¶
Variable |
Value |
|---|---|
Weight |
Standard version: 190 g. |
Temperature range |
-40 to 65 ºC. |
Protection rating |
IP67. |
Maximum acceleration |
32 g. |
Power input |
6.5 V to 36 V. |
Temperature measurement range |
-40 to 55 ºC. Warning An external pressure sensor is required to measure below -20 ºC. |
Interfaces¶
Connector Layout¶
Connectors¶
Index |
Connector |
|---|---|
1 |
LOS SSMA connector |
2 |
68-pin connector |
Mating Connectors¶
Index |
Connector |
Mating Connector |
|---|---|---|
1 |
RF antenna (SSMA Jack Female) |
SSMA male Plug, low-loss cable is recommended. |
2 |
Connector HEW.LM.368.XLNP |
Mating connector: FGW.LM.368.XLCT. Mating harness with cable is available on demand with the Embention reference P007043 B000358 |