Troubleshooting

Incorrect configuration when upgrading from 6.12 to 6.14

If users have an incorrect configuration of 4x modes menu in firmware version 6.12 when doing the upgrate to 6.14, the following must be done to fix it:

1. First, users will need to have downloaded the .ver file of the Autopilot 1x configuration to be fixed before starting the upgrade process.

   If they have not downloaded it, please contact the support team by opening a Ticket in the user's Joint Collaboration Framework for further assistance on this.

2. Open 1x PDI Builder app v6.12.62 or higher and click on the 1x Veronte option to access the app in offline mode.

   

3. Then click on the icon to load the .ver file, select it in the user's local storage and click Select.

   

4. Modify the settings in the 4x Veronte tab of the Control menu to correct the autopilot configuration.

5. Now downlaod the .ver file with the correct configuration by clicking on the icon and save it to the local storage.

6. Open 1x PDI Builder app v6.14 and click on the Upload PDI option to load the .ver file with the correct configuration to the connected Autopilot 1x.

   

7. Select from the user's local storage the .ver file previously downloaded with the proper configuration.

8. Finally, save the configuration by clicking on the icon.

Autopilot 1x should now be in version 6.14 with the correct migrated PDI.