Quick Start¶
Veronte Link establishes communication between a computer and any Veronte product by creating a VCP bridge. It allows to use multiple control stations and autopilots to be interconnected, operating simultaneously.
Veronte Link also includes a post-flight viewer, to reproduce all recorded data from previous flights and generate plots and reports.
Veronte Link supports Windows operating system.
Note
Windows 10 is recommended, but Windows 11 is supported.
System Requirements¶
Before executing this software, users should check the following sections with the minimum and recommended PC hardware requirements.
Minimum requirements
CPU: Intel Core i5-8365UE
RAM: 8 GB DDR4
STO: 256 GB SSD
Recommended requirements
CPU: 12th Gen Intel(R) Core(TM) i7-12700H 14 cores up to 4,70 GHz
RAM: 32,0 GB
STO: 1TB SSD M.2 NVMe PCIe
Installation¶
Once a Veronte device has been purchased, a GitHub release should be created for the customer with the application.
To access to the release and download the software, read the Releases section of the Joint Collaboration Framework manual.
To install Veronte Link on Windows, execute Veronte Link.exe and follow the indications of the Setup Wizard.
