Quick Start

Veronte Link establishes communication between a computer and any Veronte product by creating a VCP bridge. It allows to use multiple control stations and autopilots to be interconnected, operating simultaneously.

Veronte Link also includes a post-flight viewer, to reproduce all recorded data from previous flights and generate plots and reports.

Veronte Link supports Windows operating system.


Windows 10 is recommended, but Windows 11 is supported.

System Requirements

Before executing this software, users should check the following sections with the minimum and recommended PC hardware requirements.

Minimum requirements

  • CPU: Intel Core i5-8365UE

  • RAM: 8 GB DDR4

  • STO: 256 GB SSD

Recommended requirements

  • CPU: 12th Gen Intel(R) Core(TM) i7-12700H 14 cores hasta 4,70 GHz

  • RAM: 32,0 GB

  • STO: 1TB SSD M.2 NVMe PCIe


Once a Veronte device has been purchased, a GitHub release should be created for the customer with the application.

To access to the release and download the software, read the Releases section of the Joint Collaboration Framework manual.

To install Veronte Link on Windows, execute Veronte Link.exe and follow the indications of the Setup Wizard.


In case of any issue during installation, please disable Windows Defender and Firewall. To disable Firewall, go to “Control Panel” and “Firewall of windows”, then click on Turn off.


Windows Defender Firewall


Windows Defender Firewall - Customise Settings