Quick Start¶

MEX PDI Calibration is the application tool that allows the user to calibrate the magnetometer of the Veronte MEX.

Every time MEX is employed on a different geographic region, the magnetometer should be calibrated, since the magnetic field changes at each region. In addition, it should be calibrated the first time it is used.

To calibrate a MEX magnetometer, first of all download and install MEX PDI Calibration.

System Requirements¶

Before executing this software, users should check the following sections with the minimum and recommended PC hardware requirements.

Minimum requirements

CPU: Intel Core i5-8365UE
RAM: 8 GB DDR4
STO: 256 GB SSD

Recommended requirements

CPU: 12th Gen Intel(R) Core(TM) i7-12700H 14 cores up to 4,70 GHz
RAM: 32 GB
STO: 1 TB SSD M.2 NVMe PCIe

Download¶

Once the MEX has been purchased, a GitHub release should be created for the customer with the application.

To access to the release and download the software, read the Releases section of the Joint Collaboration Framework manual.

Installation¶

To install MEX PDI Calibration on Windows just execute the “MEXPDICalibration.exe” file and follow the indications of the Setup Wizard. Administrator rights are needed.

Warning

If there is any problem with the installation, please disable the antivirus and the Windows firewall. Disabling the antivirus depends on the antivirus software. To disable the firewall, go to “Control Panel” \(\Rightarrow\) “System and Security” \(\Rightarrow\) “Windows Defender Firewall” and then, click on “Turn Windows Defender Firewall on or off”.

../_images/windows_firewall.png — **Windows Defender Firewall**¶

../_images/turn-off-firewall.png — **Windows Defender Firewall Settings**¶