Devices¶
Jetibox¶
CEX can simulate a Jetibox to read telemetry from legacy Jeti devices.
Jetibox panel¶
Enable: It can be enabled or disabled by the user.
SCI Port: A SCI port must be selected. The available options are: SCI A, SCI B or SCI C.
Besides, a configuration is needed in SCI and I/O Setup panels.
An example of this can be seen in the Jetibox - Integration examples section.
Note
The serial port will be totally reserved for this, so it will not be usable to other things and the I/O Setup affecting it wil be ignored.
Scorpion tribunus¶
CEX can read telemetry from Tribunus ESCs by connecting it to one of its serial ports.
Scorpion tribunus panel¶
The following parameters are configurable:
Enable: It can be enabled or disabled by the user.
Telemetry period.
MCU telemetry 1/2 period: Telemetry period for MCU devices.
PWM ID: PWM ID associated to the Scorpion Tribunus.
The serial port has to be configured in the I/O Setup panel.
An example of this can be seen in the Scorpion tribunus - Integration examples section.
Note
The serial port will be totally reserved for this, so it will not be usable to other things and the I/O Setup affecting it wil be ignored.