veronte CEX

CEX Base

CEX is able to send information about its version and Jeti telemetry from devices connected to CEX, this is the “status message”. It is possible to define the CAN Id used for those messages.

Enable the Extended checkbox to use the extended CAN protocol (with a 29-bit identifier), disable it to use the standard protocol (11-bit identifier).

../../_images/cex_base.PNG

Cex Base panel

Status

This option enables the periodic sending of the status message that Veronte Link uses to recognise CEX.

../../_images/cex_status.PNG

Status panel

Period: Enter a desired period to send repeatedly the status message.

Note

VCP is the Veronte Communication Protocol. To know more, read the VCP user manual.