devices Devices

Jetibox

CEX can simulate a Jetibox to read telemetry from legacy Jeti devices.

../../_images/jetibox.png

Jetibox panel

  • Enable: It can be enabled or disabled by the user.

  • SCI Port: A SCI port must be selected. The available options are: SCI A, SCI B or SCI C.

Besides, a configuration is needed in SCI and I/O Setup panels.

An example of this can be seen in the Jetibox - Integration examples section.

Note

The serial port will be totally reserved for this, so it will not be usable to other things and the I/O Setup affecting it wil be ignored.

Scorpion tribunus

CEX can read telemetry from Tribunus ESCs by connecting it to one of its serial ports.

../../_images/scorpion.png

Scorpion tribunus panel

The following parameters are configurable:

  • Enable: It can be enabled or disabled by the user.

  • Telemetry period.

  • MCU telemetry 1/2 period: Telemetry period for MCU devices.

  • PWM ID: PWM ID associated to the Scorpion Tribunus.

The serial port has to be configured in the I/O Setup panel.

An example of this can be seen in the Scorpion tribunus - Integration examples section.

Note

The serial port will be totally reserved for this, so it will not be usable to other things and the I/O Setup affecting it wil be ignored.