logo
Home
    • 5.42.28
    • 6.2.38
    • 6.4.160
    • 6.4.68
    • 6.4.90
  •  EN
  • PDF
  • Epub
  • Quick Start
  • System Layout
  • Hardware Installation
  • Pipe Configuration
  • Users & access level
  • Workspace
  • Veronte Configuration
    • File Management
    • Setup Toolbar
      • Veronte
      • Connections
      • Devices
      • Control
      • Navigation
      • Automations
        • Events
        • Actions
          • Atmosphere Calibration
          • Change Active Sensor
          • Command Block
          • Custom CAN TX
          • Custom Serial TX
          • DEM Calibration
          • Enable/Disable Wind Estimation
          • Entrance EKF
          • Envelope
          • FTS Activation
          • Feature
          • Format SD
          • Go To
          • Ground Effect
          • Mode
          • Navigation
          • Obstacle Avoidance
          • Output
          • Periodical
          • Phases
          • Ports
          • Run Block Program
          • Safety Bits
          • Select Arcade Axis
          • Stick Priority
          • Terrain Obstacle
          • Track
          • User Log
          • Variable
          • Yaw
      • Variables
      • Panel
      • HIL
      • Programs
      • Block PDIFs
    • Installation
    • License & Safe Mode
    • Veronte LOS (Line Of Sight)
  • Mission
  • Operation
  • Post Flight
  • Simulation
  • Examples
  • Troubleshooting
  • Acronyms & Definitions
  • Axes Convention
  • Feedback
  • Compatible devices
  • 4x Redundant Autopilot - Arbiter
  • Docs »
  • Veronte Configuration »
  • Setup Toolbar »
  • Automations »
  • Actions »
  • Navigation
  • ← Mode
  • Obstacle Avoidance →

Navigation¶

This action is used to change the navigation mode used by the aircraft. By default, the UAV uses a sensor fusion Internal algorithm, but for example, if the GPS falls, this algorithm produces bad results so it would be convenient to change to another type if that happens (External). The navigation without GPS will make the aircraft fly stable but it will not be possible to command a path to follow during that time, so it can be used as a safety mode to avoid a malfunction of the system when the GPS signal is lost.

Veronte Configuration - Action – Navigation

Action – Navigation

The options available are:

  • Internal: uses internal data for navigation. Data (position, attitude, etc.) is processed into Veronte Unit from sensor measures.

  • External VCP: uses external data for navigation. Data (position, attitude, etc.) is provided by Veronte Communication Protocol (VCP).

  • External Var: uses external data for navigation. Data (position, attitude, etc.) is provided by Var.

  • Vectornav VN-300: uses external data for navigation. Data (position, attitude, etc.) is provided by Vectornav VN-300.

  • ← Mode
  • Obstacle Avoidance →
© Copyright 2022, Embention.