Software applications¶

Veronte Link¶

Each inner Autopilot 1x and the Arbiter must be configured individually. First of all, a connection to a computer is required employing Veronte Link. All devices can be connected one by one or simultaneously, since Veronte Link is able to manage multiple connections.

For more information, read the user manual for Veronte Link.

1x Software Manual¶

To operate individually any Veronte Autopilot 1x, read the 1x Software Manual, since all software applications are applicable to Autopilot 4x.

1x PDI Builder¶

After that, each Autopilot 1x must be configured. For more information, read the user manual for 1x PDI Builder.

4x PDI Builder¶

4x PDI Builder allows to configure the Arbiter communications, including CAN buses and input/output signals. It also configures the criterion to select the autopilot which controls the aircraft.

For more information, read the user manual for 4x PDI Builder.