Operation

Once the installation is finished, open Veronte Updater. The following main menu will appear:

Veronte Updater - Main menu

Users may notice that there are some tabs at the top of the menu:

  • Home: This is the main tab, where the whole update process takes place.

  • Advanced tools: When clicked, it displays a drop-down menu with several options to carry out on the connected device: File system, Erase firmware, Upload backup, Switch BootStage, Identify SD and Upload partition data. For more information, refer to Advanced tools section.

  • Remote ID: When clicked, a drop-down menu appears with several options to perform on the connected device related to Remote ID: Configure Remote ID, Flash Remote ID and Migrate Remote ID. For more information, refer to Remote ID section.

Warning

If users have not yet logged in to Central Login Service (CLS), the following warning message will be displayed when the app is launched. Otherwise, this message will no appear.

Login warning message

Authentication is required to use Veronte Updater; to do so click Log in.

Veronte Updater - Login

After clicking Log in, a new window will open for users to enter their credentials. If users do not have credentials, do not know what they are or have any problems logging in with them, please contact the support team via the Joint Collaboration Framework opening a Ticket or contact sales@embention.com.

Veronte Updater - Login display

If the login is successful, the screen will change as shown below:

Veronte Updater - Login succesful

If incorrect credentials are entered, the system will display the error message Incorrect username or password.

Veronte Updater - Login failed

© 2026 Embention. All rights reserved.