Measure

Turn on ruler

Using the ruler, the user can measure distances and azimuths.

The following information can be found in the each point of the figure above:

• In (º): Azimuth in degrees of the 'incoming' measure. The azimuth is the angle of the segment with respect to North.
• Out (º): Azimuth in degrees of the 'outcoming' measure. The azimuth is the angle of the segment with respect to North.
• Blue measurement: Distance from the previous point.
• Green measurement: Distance from the first point.

In addition, by clicking on the ruler icon, two more options will appear:

• Change units: The user can change the units of the measurements by clicking on this icon. The available units are: (kilometeres), (miles) and (nautical miles).

  Note

  The ruler indicates the measures with 2 decimals in order to have more precision, as can be seen in the figure above.

• Clear measurements: By clicking on it, it is possible to delete all the measurements in the mission. A confirmation pop-up window will then appear to make sure that all measurements wish to be deleted.