Software¶
Veronte Link¶
Veronte Link is the equivalent to the Preferences/Connections tab in Veronte Pipe.
It is used to open the COM Ports so that the 4x Arbiter can be detected by 4xVeronte PDI Builder.
Attention
If Veronte Pipe has a certain COM Port open, Veronte Link will not be able to use it. If this happens, close Veronte Pipe and then restart Veronte Link
Veronte Link
1.
Refresh devices
2.
Add device
3.
Connected devices
4.
Add new connection
5.
Remove selected connection
6.
Edit selected Connections
7.
Auto-Discover connections
8.
Currently open connections list
4xVeronte PDIBuilder¶
4xVeronte PDI Builder is the configuration interface for 4xVeronte Arbiter.
It can be used to perform firmware updates, load new configurations, or modify current configurations, both Offline and Online.
4x Veronte PDI Builder
4x Veronte PDI Builder - Configuration
1.
Configuration Tabs
2.
Save PDI files to 4x Arbiter
3.
Save PDI files to PC