Technical

Part list

The system consists of the following components:

  • PAN-TILT Unit
  • PCS connection cable
  • Extendible mast up to 3m
  • Rugged transport box for motion platform
  • Bag for tripod

Features

  • Ready for operation with Veronte PCS 2.2.
  • Real time tracking.
  • Data, Telemetry and Video Link Communication.
  • Tripod or Telescopic Mast Mount.
  • Directional and omnidirectional antenna combination.
  • Compatible with Veronte MCS or third party computers.
  • Easy to install.
  • 360º free rotation.
  • Easy maintenance.
  • Robust and reliable construction.

Warning

T28 needs Veronte PCS to operate.

Mechanical Specifications

Pan-tilt unit Weight 17 kg max (without antennas and Veronte PCS)
Mast Weight 21 kg
Operating temperature -20 to 60°C
Environmental protection IP54
PAN-TILT Transport case Rugged plastic case, quad track wheels, pressure purge valve, side handles and carry handle
Tripod Transport bag High quality transport bag

Electrical Specifications

T28 DC input 24 VDC
PCS power 80 to 130 W (depending on mounted antennas)
Pheripheral I/O Ports 2x CAN 2.0 Interfaces, 1x CAN FD Interface, 1x Ethernet 1000BASE Interface, 1x RS-485 Interface, 1x RS-232 Interface, 1x I2C Interface, 1x FTS Interface, 4x PWM Outputs, 1x PPM Signal, 4x Analog Inputs

Dimensions

The following figure shows the dimensional drawing of the T28.

./imgs/TrackerInterfaceDimension.png
Veronte T28 dimensions

T28 is supplied together with a telescopic foldable mast that can be extended up to 3.8m. Maximum and the minimum dimensions of the system are defined as follows.

./imgs/SystemDimensions.png
System Dimensions

Antenna Kits

Embention offers different antenna kits for T28 and PCS. They are available with different configurations in order to fit all operational requirements. To read any antenna datasheet, click on your Datasheet below. To know how to install any kit, read the section Tracker Antenna Kit Installation.

Antenna kit Part number Directional antenna Omnidirectional antenna Compatible Datalink kits

Kit A

(2.4 GHz Parabolic) 1.0

P005461

Parabolic HG2427G

Datasheet

HGV2458-05U

Datasheet

  • Datalink Kit A - Veronte SDL
  • Datalink Kit H - MicroHard

Kit B

(900 MHz Yagi) 1.0

P005459

Yagi HG914YE-NF-BLK

Datasheet

HG903UP-NF

Datasheet

  • Datalink Kit A - Veronte SDL
  • Datalink Kit B - Veronte SDL
  • Datalink Kit H - MicroHard
  • Datalink Kit I - MicroHard

Kit C

(400 MHz Yagi) 1.0

P005460

ZDADJ450-12YG

Datasheet

ANT-433-CW-QW

Datasheet

  • Datalink Kit A - Veronte SDL
  • Datalink Kit C - Veronte SDL
  • Datalink Kit H - MicroHard

Kit D

(Wideband 2x Parabolic) 1.0

P008035

Parabolic TS242601

Datasheet

HGV2458-05U

Datasheet

  • Datalink Kit L - Silvus
  • Datalink Kit M - Silvus

Kit E

(Wideband 1x Parabolic) 1.0

P007748

ZDAGP0665-26UWB

Datasheet

HGV2458-05U

Datasheet

  • Datalink Kit L - Silvus
  • Datalink Kit M - Silvus

Kit F

(DT 2.4 GHz Parabolic) 1.0

P008965

Parabolic HG2427G

Datasheet

HGV2458-05U

Datasheet

  • Datalink Kit D - DTC

Kit G

(Wideband 2x Parabolic 2x Omni) 1.0

P011427

2x ZDAGP0665-26UWB

Datasheet

2x HGV2458-05U

Datasheet

  • Datalink Kit M - Silvus

Interfaces

./imgs/TrackerPartIdentification1.png
Veronte T28 Interfaces - Parts identification
./imgs/TrackerPartIdentification2.png
Veronte T28 Interfaces - Parts identification
ID Connector Mating connector
A Antenna connection N-Type
B To Veronte PCS LOS connector
C Antenna connection
D T28 harness connection

Lemo with 68 pins

Embention reference: P007922

E


Warning

Use T28 harness connection.

T28 can only be powered through the Power Connector.


© 2026 Embention. All rights reserved.