Quick Start

This user manual covers the mechanical and electric assembly of Veronte R12S. To use it, weld input and output wires according to the Pinout section, then fix it to the assembly frame with two M3 screws.

../_images/esquema.png

Input and output diagram

Warnings

  • If all switches are off or there is more than one on switch, the output voltage will not be defined.

  • In saline environments such as coastal and oceanic, the screw material must be stainless steel.

  • The power supply must be higher than the desired output voltage (but not higher than 36 V or lower than 5.5 V).