Technical¶

Part List¶

This product includes the following devices:

Tube cap: This part shall be screwed after connecting the air tube.
Inner tube: For the fittings it is recommended to use a polyurethane tube of 2.5 mm inner diameter and 4 mm outer diameter, in order to connect it to the dynamic pressure input of the Veronte Autopilot 1x.
Connector body: This part shall be installed in the inner side of the fuselage. Epoxy can be used to fix it or any other alternative mechanical fixation method.
External Part: This part is placed outside of the aircraft. It takes the air for speed measurement and can be assembled before operation or disassembled after operation by unscrewing it.

These parts are connected with metric M5 thread. Users can employ M5 dust caps to protect them for storage.

It is recommended to locate the pitot in a region of undisturbed airflow, usually on the wing or the front section of the aircraft (nose).