bmex MEX

Mex Base

MEX is able to send information about its version and Jeti telemetry from devices connected to MEX, this is the “status message”. It is possible to define the CAN Id used for those messages.

Enable the Extended checkbox to use the extended CAN protocol (with a 29-bit identifier), disable it to use the standard protocol (11-bit identifier).

../../_images/mex_mexbase.png

Mex Base section

Status

Enable VCP Status Message enables the periodic sending of the status message that Veronte Link uses to recognise MEX.

../../_images/mex_status.png

VCP Status

  • Period: Enter a desired period to send repeatedly the status message.