bcam Devices

Jetibox

MEX can simulate a Jetibox to read telemetry from Legacy Jeti devices.

../../_images/devices_jetibox.png

Jetibox section

  • Enable: It can be enabled or disabled by the user.

  • SCI Port: A SCI port must be selected. The available options are: SCI A, SCI B or SCI C.

Besides, a configuration is needed in SCI and the I/O Setup section.

An example of this can be seen in Jetibox -> Integration Examples section.

Note

The serial port will be totally reserved for this, so it will not be usable to other things and the I/O Setup affecting it wil be ignored.

Scorpion tribunus

MEX can read telemetry from Tribunus ESC connecting it to a serial port.

../../_images/devices_scorpion_tribunus.png

Scorpion tribunus section

The following parameters are configurable:

  • Enable: It can be enabled or disabled by the user.

  • Telemetry period.

  • MCU telemetry 1/2 period: Telemetry period for MCU devices.

  • PWM ID: PWM ID associated to the Scorpion Tribunus.

The serial port has to be configured in the I/O Setup section.

An example is explained in Scorpion -> Integration Examples section.

Note

The serial port will be totally reserved for this, so it will not be usable by other things and the I/O setup affecting it wil be ignored.