Quick Start

MC110 PDI Builder is the main tool for setting all configurable parameters of the Veronte Motor Controller MC110.

Here the user can configure, tune and define the motor, control systems and sensors to be used together with the ESC.

Once MC110 has been detected on Veronte Link, download and install MC110 PDI Builder.

System Requirements

Before executing this software, users should check the following sections with the minimum and recommended PC hardware requirements.

Minimum requirements

  • CPU: Intel Core i5-8365UE

  • RAM: 8 GB DDR4

  • STO: 256 GB SSD

Recommended requirements

  • CPU: 12th Gen Intel(R) Core(TM) i7-12700H 14 cores up to 4,70 GHz

  • RAM: 32 GB

  • STO: 1 TB SSD M.2 NVMe PCIe


Once a MC110 device has been purchased, a GitHub release should be created for the customer with the application.

To access to the release and download the software, read the Releases section of the Joint Collaboration Framework manual.


To install MC110 PDI Builder on Windows just execute the “Mc110PDIBuilder.exe” file and follow the indications of the Setup Wizard. Administrator rights are needed.


In case of any issue during installation, please disable Windows Defender and Firewall.

To disable Firewall, go to “Control Panel” and “Firewall of windows”, then click on Turn off.


Windows Defender Firewall


Windows Defender Firewall: Settings