Quick Start

MC01S PDI Builder is the main tool for setting all configurable parameters of the MC01S.

Configuration for Veronte MC01S should be created according to the needs of the belonging system.

Once MC01S has been detected on Veronte Link, download and install MC01S PDI Builder.

System Requirements

Before executing this software, users should check the following sections with the minimum and recommended PC hardware requirements.

Minimum requirements

  • CPU: Intel Core i5-8365UE

  • RAM: 8 GB DDR4

  • STO: 256 GB SSD

Recommended requirements

  • CPU: 12th Gen Intel(R) Core(TM) i7-12700H 14 cores up to 4,70 GHz

  • RAM: 32 GB

  • STO: 1 TB SSD M.2 NVMe PCIe

Download

Once a MC01S device has been purchased, a GitHub release should be created for the customer with the application.

To access to the release and download the software, read the Releases section of the Joint Collaboration Framework manual.

Installation

To install MC01S PDI Builder on Windows, execute MC01SPDIBuilder.exe and follow the steps:

  1. Click on Next:

    ../_images/installation1.png

    Windows Installation - Step 1

  2. Read and accept the EULA (End-User License Agreement), then click on Next:

    ../_images/installation2.png

    Windows Installation - Step 2

  3. Select the directory where where the software will be installed (with the Change button), then click on Next:

    ../_images/installation3.png

    Windows Installation - Step 3

  4. Finally, click on Install (administrator rights are needed):

    ../_images/installation4.png

    Windows Installation - Step 4

  5. After a few seconds, the following window will appear indicating the process was succesful. Click on Finish:

    ../_images/installation5.png

    Windows Installation - Step 5

Note

In case of any issue during installation, please disable Windows Defender and Firewall. To disable Firewall, go to “Control Panel” and “Firewall of windows”, then click on Turn off.

../_images/firewall-windows-menu.png
../_images/turn-off-firewall.png