Telemetry¶
In the Telemetry menu, the user chooses the variable or group of variables to be sent via the CAN bus. The following items can be configured:
Telemetry menu¶
By clicking on the 
icon more messages can be added and by clicking on the 
icon, messages can be deleted.
Messages are configured clicking on the 
icon:
Telemetry menu - Custom messages example¶
Since this section works in a similar way to the CAN Custom Message configuration in the 1x PDI Builder software, the explanation to configure the telemetry messages via CAN can be found in the CAN Setup -> Input/Output section of the 1x PDI Builder user manual.