Analog devices

CEX is configured to read voltages from ANALOG 0-7 inputs (pins 43-50), automatically storing the received values in Real variables 1320-1327.

Note

The correspondence of analog pins and these variables can be consulted in the Real Variables list of CEX Software Manual.

For reading information from an analog device, make the following connections:

1. Connect the analog output of the device to one of the designated pins of CEX (pins 43-50).

2. Connect the GND of the device to the ground for analog signals of CEX (pin 42).

Note

For further details on the pins of CEX, consult the Pinout - Hardware Installation section of the CEX Hardware Manual.