Quick Start

1x PDI Tuning is the application tool that allows the user to manage the control laws of the Autopilot 1x during operation by adjusting each of the P (proportional) I (integral) D (derivative) gains.

Once Autopilot 1x has been detected on Veronte Link, install 1x PDI Tuning.

System Requirements

Before executing this software, users should check the following sections with the minimum and recommended PC hardware requirements.

Minimum requirements

  • CPU: Intel Core i5-8365UE

  • RAM: 8 GB DDR4

  • STO: 256 GB SSD

Recommended requirements

  • CPU: 12th Gen Intel(R) Core(TM) i7-12700H 14 cores up to 4,70 GHz

  • RAM: 32,0 GB

  • STO: 1TB SSD M.2 NVMe PCIe

Download

Once the Veronte Autopilot 1x has been purchased, a GitHub release should be created for the customer with the application.

To access to the release and download the software, read the Releases section of the Joint Collaboration Framework manual.

Installation

To install 1x PDI Tuning on Windows just execute “1xVerontePDITuning.exe” and follow the indications of the Setup Wizard.

Warning

If users have any problems with the installation, please disable the antivirus and the Windows firewall. Disabling the antivirus depends on the antivirus software.

To disable the firewall, go to “Control Panel” \(\rightarrow\) “System and Security” \(\rightarrow\) “Windows Defender Firewall” and then, click on “Turn windows Defender Firewall on or off”.

../_images/windows_firewall.png

Windows Defender Firewall

../_images/windows_firewall2.png

Windows Defender Firewall: Customize Settings