Quick Start

This user manual covers the assembly of Veronte Serial. To use it, weld wires according to the Pinout section.

The following diagram summarizes the Serial behaviour:

../_images/scheme.png

Overall Serial diagram

Warnings

  • When Serial is wrapped with a thermal tube or cable, make sure it is not excessively thermally insulated, to prevent overheating.

  • Be careful welding pads and avoid short circuits between them.

  • Ground pins are common, connect them to the same ground reference to prevent short circuits.

Requirements

  • Power supply of 5 V DC.

  • Cables with AWG from 22 to 24.

  • A tin soldering iron to weld the cables.