Technical¶

Part List¶

This product includes the following devices:

Fitting part: This part shall be installed in the inner side of the fuselage. Epoxy can be used to fix it or any other alternative mechanical fixation method. In the rear side it has a fitting to connect to the dynamic pressure input of the Veronte Autopilot 1x. This connection shall be done using a 2mm inner diameter polyurethane tube or a silicone tube.
External Part: This part is placed outside of the aircraft. It takes the air speed measurement and can be assembled before operation or disassembled after operation by unscrewing it.

These 2 parts are connected with metric M5 thread. Users can use M5 dust caps to protect them between operations.

Specification	Value
Weight	13 g
Length	160 mm
Inner diameter of the tube joining the fitting	2 mm
Outputs	Dynamic Pressure

It is recommended to locate the pitot in a region of undisturbed airflow, usually on the wing or front section of the aircraft (nose).