Quick Start¶
MC01B PDI Builder is the main tool for setting all configurable parameters of the MC01B.
Configuration for Veronte MC01B should be created according to the needs of the belonging system.
Once MC01B has been detected on Veronte Link, download and install MC01B PDI Builder.
System Requirements¶
Before executing this software, users should check the following sections with the minimum and recommended PC hardware requirements.
Minimum requirements
CPU: Intel Core i5-8365UE
RAM: 8 GB DDR4
STO: 256 GB SSD
Recommended requirements
CPU: 12th Gen Intel(R) Core(TM) i7-12700H 14 cores up to 4,70 GHz
RAM: 32 GB
STO: 1 TB SSD M.2 NVMe PCIe
Download¶
Once a MC01B device has been purchased, a GitHub release should be created for the customer with the application.
To access to the release and download the software, read the Releases section of the Joint Collaboration Framework manual.
Installation¶
To install MC01B PDI Builder on Windows, execute MC01BPDIBuilder.exe and follow the steps:
Click on Next:
Windows Installation - Step 1¶
Select the directory where where the software will be installed (with the Change button), then click on Next:
Windows Installation - Step 2¶
Finally, click on Install (administrator rights are needed):
Windows Installation - Step 3¶
After a few seconds, the following window will appear indicating the process was succesful. Click on Finish:
Windows Installation - Step 4¶
Note
In case of any issue during installation, please disable Windows Defender and Firewall. To disable Firewall, go to “Control Panel” and “Firewall of windows”, then click on Turn off.
