Sensors section permits to configure any sensor connected or internal from Veronte.

Accelerometer Configure the accelerometer parameters
Altimeter Enable the Altimeter into navigation if a sensor is connected to Veronte
GNSS Configure GNSS receivers, RTK, Compass, External source and NTRIP
Gyroscope Configure the gyroscope parameters
I2C devices Configure Lidar sensors connected through I2C
Magnetometer Configure the internal magnetometer or an external one
Obstacle Detection Enables the obstacle detection and configured it
Pressure Menu including both dynamic and static pressure configurations
RPM Configure RPM sensors parameters
Speed Down Enable the navigation using a Speed down sensor
Ultrasound Menu to configure Internest with Veronte