Software Installation

There are two ways to make the connection to configure CEX: via Veronte Autopilot 1x or direct connection.

  • Via Veronte

    It is usual to have a CEX in a system that does not allow to directly connect CEX to a PC. In that situation, we can configure a Veronte Autopilot 1x that is connected via CAN with CEX. To be able to establish a connection between 1x PDI Builder and CEX, please see the Integration Examples section of the CEX PDI Builder manual.


CEX connection through Veronte Autopilot 1x

  • Direct connection

    By default CEX can establish VCP communications over its SCI-A and SCI-B ports. Using any of these connection will be possible to connect it to a PC.


Direct CEX connection

The CEX software configuration is explained in the CEX Software Manual.