Mission

The common way to work with Veronte is to create missions. Missions can be created and managed though the Mission menu. To access this menu, click on logo000 at the upper left corner and select Mission in the pull-down menu. The Mission toolbar will appear as shown at the image below:

Mission - Mission Menu Access

Mission toolbar menu access

The mission toolbar provides graphical tools to create the path that the aircraft follows while it is in cruise phase. Multiple missions can be created for different purposes. The missions generated are stored into the Autopilot Air unit and into the Operation folder of the PDI configuration files when exported.

Next, a detailed description of the toolbar is given. And an example of how to set up a mission will be given in the following section.

Toolbar

Mission - Mission Toolbar

Mission toolbar

The controls found in the toolbar are detailed in the following table.

logo1

Open Detail

Displays Terrain and Marks configuration.

logo2

Colours

Line colour.

logo3

New Waypoint

Add new waypoint on click position.

logo4

Segment

Add a straight line.

logo5

New Orbit

Add a orbit.

logo6

Fly By

Tool to adapt straight path corners into turns.

|logo7|

Intersect Lines

Undoes the Fly-by command.

|logo8|

Multiple Choice

Selection tool.

|logo9|

Event Mark

Add a mark to trigger an event.

|logo10|

Obstacle

Add an obstacle signal the aircraft has to avoid.

|logo11|

New Polygon

Draw areas on the map for association with polygon event.

|logo12|

Circular Area

Draw a circular area on the map. For association with polygon events.

|logo13|

References

Create points of reference.

|logo14|

Mapping

Predefined tasks helper: Search & Rescue, Photogrametry,…

|logo15|

Import Route

Import NMEA route configuration.

|logo16|

Export Route

Export to a .kml or a .csv file the route created.

|logo17|

Ruler

Measure on map.