Quick Start

Warnings

• In maintenance mode, CAN interface A will switch to a baudrate of 1M, while CAN interface B will switch to a baudrate of 500k.

• For configuration purposes, only specific baudrates can be used. Once in maintenance mode, 1M baudrate must be used to configure Smart CAN Isolator through the A interface, and 500k for the B interface. See maintenance mode for more information.

• At least one available mailbox must be left for Smart CAN Isolator to be able to send messages through that given interface.

• Disabling the Status Message will disable other apps and devices (i.e. Veronte Link) from detecting Smart CAN Isolator automatically.