1x PDI Calibration is the application tool that allows the user to perform certain calibrations of a Veronte Autopilot 1x and trim stick inputs. The calibrations that can be performed from this app are as follows:
Sensors Calibration: IMUs and Magnetometers
Calibration of Servos
In addition, it also includes a Terminal Manager that can be used, for example, to configure the Microhard internal radio (Veronte Autopilot 1x with
hardware version 4.5 internal radio).
Once Autopilot 1x has been detected on Veronte Link, install 1x PDI Calibration.
Once the Veronte Autopilot 1x has been purchased, a GitHub release should be created for the customer with the application.
To access to the release and download the software, read the Releases section of the Joint Collaboration Framework manual.
To install 1x PDI Calibration on Windows just execute “1xVerontePDICalibration.exe” and follow the indications of the Setup Wizard.
If users have any problems with the installation, please disable the antivirus and the Windows firewall. Disabling the antivirus depends on the antivirus software.
To disable the firewall, go to “Control Panel” \(\rightarrow\) “System and Security” \(\rightarrow\) “Windows Defender Firewall” and then, click on “Turn windows Defender Firewall on or off”.