Block Programs

Block programs are the core of Autopilot 1x. In this menu, all flight control algorithms can be found, divided in different independent programs with different functions. All programs are executed at GNC (Guidance-Navigation-Control) time.

A Program is a custom algorithm executed by Autopilot 1x. While their main purpose is the control of the aircraft, Programs can be used to develop a wide variety of applications, from simple math operations to complex estimation filters.

Block programs provide the user with a block programming interface that 1x will then execute at core frequency. The fact that it is designed in this way gives it a high versatility, unlimited freedom and mimo control capabilities. This high versatility is thanks to this block programming interface, as they are easily manageable and highly customisable blocks, so that each customer can perfectly define their control algorithms regardless of the vehicle and the target they have.

The Block Programs section is split into Core 1 and Core 2. See the respective sections for further details.